CTP Honeycomb CTP is a sandwich panel built from two CTP (GRP) facings with a honeycomb core in between. The honeycomb structure delivers high bending stiffness at low weight, which makes it a preferred choice where weight is critical. In the Yön Panel range it is positioned separately from the XPS, polyurethane and PET-foam-core variants.
CTP Honeycomb CTP is a sandwich panel: glass-fibre-reinforced polyester (GRP / CTP) facings with a honeycomb core between them. The honeycomb core is a hexagonal-cell geometric structure that delivers high structural stiffness while leaving most of the core volume empty. This page introduces the general facing/core logic; exact figures (cell size, density, compressive strength) are confirmed per project.
Two CTP facings on the outside, a honeycomb core in the middle. As with other Yön Panel variants, thickness and finish are confirmed per project depending on the application; no fixed thickness list is stated here.
The honeycomb core optimises the weight-to-stiffness balance: the cellular structure reduces material volume while keeping bending stiffness high. That matters in transport and cladding applications where weight directly affects cost or performance.
Weight-critical body panels, interior cladding and lightweight load surfaces are the natural place to evaluate this card. For an overview see CTP Panel; for application examples see use cases.
Ask whether the project genuinely has a weight constraint, and confirm the required finish and thickness. If thermal insulation is the priority, CTP EPS CTP may fit better; if a high strength-to-weight ratio is the goal, CTP PET CTP is the closer match.
Other CTP panel types: CTP Polyurethane Panel, CTP Birch Plywood CTP Panel, XPS Panel. For a quote, use the contact form.
